Most individuals nowadays cannot afford to go for one single with a broken water heater in the home. This just shows how important this gadget is in the house. There is no way you will enjoy a long shower is the water is too cold. It can be even worse if you are dealing with freezing months or the winter season.
Most water heaters generally have a life expectancy of eight to twelve years. The duration can be longer or shorter depending on the number of regular users and frequency of use. A large proportion of homeowners enjoy the service that the water heater gives them until they forget that the equipment needs to be replaced or repaired. First, let me share with you some of the signs that will tell you that you need water heater repair in your home.
First, you may hear an annoying noise when you turn on the water heater or it does not seem to stop. It can be annoying to have a water heater that whines, bangs, pops, or cracks whenever you turn it on. The situation can be more frightening if this noise does not seem to stop. Such noises will be telling you that your heater may be giving up very soon. Constant noise may be a sign of the imminent failure of mineral buildup. In case you encounter these issues consistently. You need to think about water heater repair or replacement.
In some instances, you will discover that the water that is coming out of your shower is cold. This is a clear indication that the water heater is not working well. Be keen to realize when the water that is coming out of your heater is not as cold as it used to be or the heat does not last as long as expected. A consistent drop in the water temperature will tell you that the equipment has malfunctioned and you need to call water heater repair services.
Another sign is when you notice that the water that is coming out of your shower is dirty. You will know that your heater has failed when rusty and brown water comes out of a shower that has a strange metallic taste. The other bad sign is having dirty water in your tank. You can determine if the problem is with the buildup by watching if there is an increase in sludge or sediment in the tubes and tank or hose.
Seeing water on the floor around your tank is the other danger sign. Also, make sure that there is no water that pools around your heating unit. In case you notice that there are some puddles on the floor around your tank, it’s a clear indication of corrosion and you need to take immediate action before things get out of hand.
Once you notice these signs, there are some tips that you can use for effective water heater repair and installation. In case you choose to install, a new water heater, you must be sure that you have chosen the right type. Water heaters can either be gas fueled or electric. Most gas heaters have lower operational costs than electric ones but this varies from one area to the other and you need to check the ratings of your area. In case your home does not have the gas service, the only option you are left with is the electric one.
Measure the dimensions of the current hot and cold-water pipes to check their plumbing requirements and ensure that the new heater fits properly. You may be forced to buy couplers so that the pipes can fit properly depending on the age of your home.
Its advisable to turn off any utilities that are attached to the water heater before you do anything. After turning it off, drain the hot water tank and disconnect all the cold and hot water pipe connections. Hook up a hose in order to drain the water from your tank to the bottom’s outlet and drain the water into a drain or outside.
When the old water unit is successfully disconnected and completely drained of water, you can now remove it and create room for the installation of a new one. In case of repair, you can try to diagnose where the problem is and repair or replace the faulty parts. Make sure you re-install the required fittings like the pressure relief valves and temperature valve if you had uninstalled them.
Use the right procedures to connect the water lines so that there are no leaks when the tank is full. From here, you can now connect the power source which can either be an electric or gas line. Remember to attach the flue vent if the source of fuel is a gas line so that the fumes are properly directed of the house. Once all the connections are complete, fill the water heater with water and turn the unit on.
It is a wise idea to insulate the water heater tank using the water heater tank blanket. This can lower your utility bills to keep the water hot when you need it. Even though it is possible to install the new unit by yourself, the best practice is to hire a plumbing professional. This will save you a lot of time and money over time unless you have a lot of experience in handling plumbing repairs.
Here is a list of our services you can get at The Water Heater Guy:
FOR MORE INFO, CALL OR TEXT ANY OF OUR NUMBERS
Phone & Address
Lee & Collier: 239-243-8537
3343 Fowler St.
Fort Myers FL 33901
SHARE THIS PAGE!